The laying specifications for anti slip industrial rubber sheet are an important project involving multiple aspects, aiming to ensure the installation quality, performance and service life of the rubber sheet. The following are some key specifications for laying anti slip industrial rubber sheet:

I. Material Requirements

1. **Raw Material Selection**: Anti slip industrial rubber sheet should be made of synthetic or natural rubber materials that are wear-resistant, age-resistant, have excellent elasticity and anti slip performance.

2. **Environmental Protection Requirements**: The rubber materials used should be non-toxic, odorless, pollution-free and meet relevant environmental protection standards.

3. **Size Specifications**: Cut to the appropriate size according to actual needs to ensure the beauty and practicality of the laid sheet.

II. Construction Preparation

1. **Base Treatment**: The ground should be flat, dry, free of oil and dust. If necessary, it should be ground and cleaned.

2. **Measurement and Layout**: According to the design drawings, accurately measure and lay out the laying area to determine the starting and ending points of the laying.

3. **Material Preparation**: Cut the anti slip industrial rubber sheet to the required size, transport it to the construction site, and keep the material at an appropriate temperature, avoiding direct sunlight.

 

＞send emails to sales@jingdongrubber.com,get a quote now

III. Laying Process

1. **Pre-laying**: Before formal laying, conduct a pre-laying to check the splicing effect and overall layout of the rubber sheet.

2. **Applying Adhesive**: Use special adhesive to evenly apply to the back of the rubber sheet and the base of the ground, paying attention to the thickness and uniformity of the application.

3. **Laying**: When the adhesive reaches a semi-dry state, start laying the rubber sheet from one end to the other, ensuring that the boards are closely attached to each other without air bubbles or gaps.

4. **Compaction**: After laying, use a roller to roll over the surface of the rubber sheet to remove internal air and ensure full contact with the ground.

5. **Trimming**: Trim the edges to ensure neatness and beauty, and carry out necessary cleaning work.

IV. Acceptance Standards

1. **Appearance Inspection**: The surface of the rubber sheet should be smooth and flat, without obvious seams or color differences; the corners should be neat and there should be no lifting edges.

2. **Firmness Test**: Check the firmness of the rubber sheet by stepping or lightly pressing to ensure it is firmly attached to the ground without loosening or shifting.

3. **Anti slip Performance Test**: Use professional equipment to test the friction coefficient of the rubber sheet surface to ensure its anti slip performance meets the design requirements.

V. Post-construction Maintenance

1. **Regular Cleaning**: Use neutral detergent to regularly clean the surface of the rubber sheet to keep it clean and tidy.

2. **Protective Measures**: Lay dust-proof mats or carpets on the surface of the rubber sheet to prevent sharp objects from scratching the surface.

3. **Inspection and Maintenance**: Regularly inspect the wear of the rubber sheet. If there is any damage, repair or replace it in time.

 

Jingdong Rubber Co., Ltd. is a professional rubber sheet manufacturer, producing silicone rubber sheet, natural rubber sheet, fluorine rubber sheet, neoprene rubber sheet, insulating rubber sheet,EPDM rubber sheets, oil-resistant rubber sheets, anti-static rubber sheets, flame-retardant rubber sheets, conductive rubber sheets, anti-slip rubber sheets, and cowshed mats, etc. with 40 years of industry experience, are popular both at home and abroad. If you need any of our products,please send emails to sales@jingdongrubber.com.